The state-of-the-art transducers developed for the VSA II offer the highest intelligibility and wider frequency response, according to RCF philosophy. A 1,4 tesla flux density is the result of the massive neodymium magnet to achieve an incredible mid frequency dynamic range. The neodymium magnet is very lightweight and helps to compact the size of the overall system.
The powerful multi-channel DSP controls each of the 20 Class-D 50 W power amplifiers, which can drive the 20 transducers with an optimal headroom. The amplification circuit includes several protections and controls to operate in safe mode. The switching-mode power supply module is connected with the DSP main board to check voltage, current and temperature status data. It operates in both 115/230 Volt AC modes and in 24 DC as a backup power source. Every model includes active protection against over-voltage and over-current. During the development of the VSA, high priority was given to critical signal paths and self-monitoring components to provide easier installation, simpler maintenance, and maximum safety and reliability. Also ideal for Voice Alarm applications.
The unobtrusive and robust aluminium cabinet blends seamlessly in any architecturally sensitive environments. The standard colour is white RAL 9003, and custom colours are available on request. The modular design approach offers a uniform heat dissipation for maximum consistency over time. The installation is particularly simple thanks to the drilling template on the wooden package and the light weight of the speaker. Optional swivel brackets are available on request if the column has to be oriented horizontally.
The plastic cap/shield on the bottom-end of the column makes the connections safe and stable. Two balanced inputs are available for independent wiring of Priority and Aux audio sources. The Priority connector is available on ceramic terminal blocks with a thermal fuse for Voice Alarm applications and can be controlled by a fail-safe activation command. A remote switch-on facility is available to avoid power ON and OFF through electric switches when the columns are not part of a Voice Alarm system. By detecting the audio presence, the column can switch itself ON automatically, and then OFF after a period during which it is not used. The Data Link port allows control and monitoring from the RDNet Network, while the monitoring port can be used for ‘faulty’ remote indications. AC and DC Power supply connections are on top of the column, protected by a plastic cover. Connectors are VDE type for AC and ceramic terminal blocks for DC.
MONITORING AND MANAGEMENT NETWORK
RDNet is a proprietary protocol for RCF products that provides straightforward monitoring and intuitive control of the audio system down to every single device/object. Each device has its DSP, giving the possibility to address specific presets or parameterx change to single or groups of objects. The beam steering configuration is fast and precise as well as the Equalization preset adjustments. The RCF RDNet is the perfect tool to help designers and installers configure a VSA system setup in any venues.
Allows specifying the listening area by selecting a preset.
Simple, easy and suitable for all systems, advisable for users and installers that are not so experienced. Only two parameters are necessary: the loudspeaker installation height and the maximum distance to be covered.
For experts/installers, it allows the setting of both loudspeakers tilt and beam parameters.
The equalization can be chosen among 6 different settings, 3 of which are user custom with a complete range of available equalization types:
AUDIO CONTROL WINDOW
Two different audio channels available, the Priority Channel will be active when needed if the priority function is activated, overriding the AUX Channel. A delay on the DSP improves the intelligibility on big installations. The parameter to be set is not the time, but the distance (range: from 0 to 99 metres, 3 m steps) between the first loudspeaker line and the one of the loudspeaker to be set. The polarity control (Phase) is helpful to minimise destructive interferences due to particular loudspeaker positions.
The VSA-RC is an easy way to control the VSA speakers through the VSA Remote App available on iOS or Android. The following data are configurable on each VSA through the VSA-RC remote control:
The I/R receiving diode is recessed, and its directivity coverage has been narrowed to receive I/R commands just from the dedicated remote located in front of the column axis. Thanks to this, if two columns are close to each other, there is no risk of two receivers being driven at the same time.
© Bản quyền thuộc về rcf.vn | Cung cấp bởi MinhDuongADS.Com